We are authorized local agent in Malaysia for CONTROLMATIK products. Here are some products range that are offered and all of them are registered with SPAN. Feel free to contact us for others products as well.
Related links: www.controlmatik-abw.si
M20C
Designed to feed gas chlorine and with minor alterations also for other gases, working on the indirect vacuum principle – capacity up to 15kg/h.
M40C
Designed to feed larger amount of gas chlorine and with minor alterations also for other gases, working on the indirect vacuum principle – capacity up to 40kg/h.
M50C
M50c function in the same way as M20C vacuum regulators, with the only different that they are designed to feed larger amounts of gas. – capacity up to 200kg/h.
M300C
Mechanical device that generates the vacuum necessary for operation of the feed system – capacity up to 15 kg/h.
M340C & M350C
The high capacity ejectors series M340C and M350C are designed to feed larger amount of gas chlorine into the water – capacity up to 200kg/h.
M3603C
A heavy duty feed unit intended for accurate manual or automatic feed of chlorine gas into water. It is designed to be controlled through 4-20ma current signal or modbus communication.
M3610C
A heavy duty feed unit intended for accurate manual or automatic feed of chlorine gas into water. It is designed to be controlled from controller (automatic control) or in case of need it can simply be switched to manual control.
M200C
Gas flow indicators applied in a gas chlorination system to regulate the flow.
M3100C
Designed to heat liquid chlorine taken from storage containers and turn it to gas chlorine.
M400 & M440
The automatic switchover system is completely vacuum operated device and automatically switches chlorine feed from an empty chlorine source to a full chlorine source, without manual reset – capacity up to 10kg/h & up to 120kg/h.
M4510C
This unit is assembled as separate signal evaluation unit with display, unit with two adjustable alarms and fault alarms, power supply unit and separate detection cell-probe. – chlorine gas leak detector.
M2103C
Chlorine gas detection sensor is designed to detect and indicate chlorine concentration in the air and to provide safety in storage areas and in places where the gaseous chlorine and sodium hypochlorite are dosed.
MR520C, MR540C & MR550C
Floor mounted chlorinator series mr500c is used for accurate feed of gas chlorine, sulphur dioxide and other gases in water supplies, waste water treatment plants and industry.
M 3800 EPESS
Ensures in combination with chlorine gas leak detector, automatic closure of chlorine cylinder or container valves in case of chlorine gas leakage.